Another fav loco
On Sunday I completed my Drewery Class 04 tram. I sanded down some of the filler applied previously and fitted some loop couplings to the buffer beams. I also made up some three-link couplings and fitted a protection plate to the front and rear cowcatchers.
The original Bachmann whistle was filed down And fitted onto the front of the cab. Later versions of these trams had double horns fitted.
I fitted hand rails to the cab using split pins, which was quite a fiddly job. The original placement of the hand rails on the brass cab sides did not appear to be correct, so I adjusted them by filling in the previous holes and drilling new ones.
The final task was to create a mounting for the chassis. To do this I used some long bolts and drilled pilot holes into the plastic supports that are glued into the body.
View original post 58 more words